Tubing sleeves en kits

Bij het werken met capillaire tubing (zoals Fused Silica of PEEKsil™) is het vaak een uitdaging om deze dunne leidingen lekvrij aan te sluiten op standaard poorten. Tubing Sleeves bieden de oplossing door de buitendiameter van de capillaire tubing kunstmatig te vergroten, zodat deze perfect past in standaard 10-32 of 6-32 coned fitting-systemen.

Resultaten worden gefilterd op:

9 producten zichtbaar

1328 - MicroTight® PEEK Sleeve Kit

Tubing sleeves en kits

1356 - MicroTight® Connector Kit - PEEK

Tubing sleeves en kits

1250 - NanoTight™ Fittings/Tubing Sleeve Kit

Tubing sleeves en kits

F-125H - MicroTight® Nut 6-32 Coned, for MicroTight Sleeve Headless

Tubing sleeves en kits

F-244 - NanoTight™ Sleeve Natural 1/16" ID x .021" ID x 1.6"

Tubing sleeves en kits

MicroTight Nut Coned for MicroTight Sleeve Standard

Op zoek naar een oplossing op maat?

Vraag een vrijblijvend adviesgesprek aan bij Inacom en kom in contact met één van onze specialisten

Advies aanvragen

Tubing sleeves en kits

MicroTight Sleeve

Tubing sleeves en kits

NanoTight Kit

Tubing sleeves en kits

NanoTight Sleeve

Waarom kiezen voor sleeves?

Minimaal Dood Volume: Sleeves centreren de tubing exact in de poort, wat cruciaal is om piekverbreding in nano- en micro-LC te voorkomen.
Flexibiliteit: Omdat sleeves niet permanent aan een ferrule vastzitten, passen ze zich moeiteloos aan verschillende poortdieptes aan.
Eenvoudige Identificatie: Dankzij de handige kleurcodering herkent u in één oogopslag de binnendiameter van de sleeve.

Sleeve OD	Type and Material	Fitting System and Port*	Capillary Tubing ODs	Pressure Limit**	Fitting Part No.
0.025"	MicroTight® (PEEK)	MicroTight®, 6-32 C	70–520 µm	4,000 psi (276 bar)	F-125
0.025"	MicroTight® (PEEK)	MicroTight®, 5/16-24 C	70–520 µm	4,000 psi (276 bar)	F-172, P-416
1/16"	NanoTight™ (FEP)	NanoTight™, 10-32 C	70 µm–1 mm	4,000 psi (276 bar)	F-333N
1/16"	NanoTight™ (FEP)	Super Flangeless™, 6-32 FB	70 µm–1 mm	750 psi (52 bar)	M-650, M-660
1/16"	NanoTight™ (FEP)	Super Flangeless™, 6-40 FB	70 µm–1 mm	750 psi (52 bar)	M-650, M-644-03
1/16"	NanoTight™ (FEP)	TinyTight™, 6-40 FB	70 µm–1 mm	600 psi (41 bar)	M-647, M-644-03
1/16"	NanoTight™ (FEP)	Alt. Lee MINSTAC®, 6-40 FB	70 µm–1 mm	600 psi (41 bar)	M-647, M-644-03
1/16"	PEEK	SealTight™ (WT), 10-32 C	175–770 µm	6,000 psi (414 bar)	F-193
1/16"	PEEK	Stainless Steel (WT), 10-32 C	175–770 µm	6,000 psi (414 bar)	U-400, U-401
1/16"	PEEK	Alt. Lee MINSTAC®, 6-40 FB	175–770 µm	1,500 psi (103 bar)	M-647, M-644-03
1/32"	FEP	MicroTight®, 6-32 C	20–380 µm	1,750 psi (121 bar)	F-126S
1/32"	FEP	Alt. Valco Nanovolume®, 6-40 C	20–380 µm	1,750 psi (121 bar)	M-645
1/32"	PEEK	MicroTight®, 6-32 C	70–495 µm	5,000 psi (345 bar)	F-126S
1/32"	PEEK	Alt. Valco Nanovolume®, 6-40 C	70–495 µm	3,250 psi (224 bar)	M-645

art No.	OD	ID	For Capillary Size	Colour	Material	Pressure Rating
F-180	0.025"	125 µm (0.005”)	70–110 µm	Red	PEEK	4,000 psi (276 bar)
F-181	0.025"	180 µm (0.007”)	125–165 µm	Yellow	PEEK	4,000 psi (276 bar)
F-182	0.025"	230 µm (0.009”)	175–215 µm	Natural	PEEK	4,000 psi (276 bar)
F-183	0.025"	280 µm (0.011”)	225–265 µm	Blue	PEEK	4,000 psi (276 bar)
F-184	0.025"	330 µm (0.013”)	275–315 µm	Orange	PEEK	4,000 psi (276 bar)
F-185	0.025"	395 µm (0.0155”)	340–380 µm	Green	PEEK	4,000 psi (276 bar)
F-186	0.025"	455 µm (0.018”)	400–440 µm	Black	PEEK	4,000 psi (276 bar)
F-187	0.025"	535 µm (0.021”)	480–520 µm	Natural	PEEK	4,000 psi (276 bar)
F-188	0.025"	152 µm (0.006”)	95–135 µm	Purple	PEEK	4,000 psi (276 bar)

Part No.	Description	Content
1328	MicroTight Tubing Sleeve Kit	Contains (6) each of the sleeve sizes listed above (F-180–F-188)
1356	MicroTight Connector Kit	Contains: a 10-pack of each MicroTight Tubing Sleeve (F-180–F-187); (2) P-770 MicroTight Adapters; and (2) MicroTight P-720 Unions

Part No.	OD	ID	For Capillary Size	Colour	Material	Pressure Rating
F-237	1/16"	125 µm (0.005”)	70–110 µm	Red	FEP	4,000 psi (276 bar)
F-238	1/16"	180 µm (0.007”)	125–165 µm	Yellow	FEP	4,000 psi (276 bar)
F-239	1/16"	215 µm (0.0085”)	160–200 µm	Natural	FEP	4,000 psi (276 bar)
F-240	1/16"	280 µm (0.011”)	225–265 µm	Blue	FEP	4,000 psi (276 bar)
F-241	1/16"	330 µm (0.013”)	275–315 µm	Orange	FEP	4,000 psi (276 bar)
F-242	1/16"	395 µm (0.0155”)	340–380 µm	Green	FEP	4,000 psi (276 bar)
F-243	1/16"	455 µm (0.018”)	400–440 µm	Black	FEP	4,000 psi (276 bar)
F-244	1/16"	535 µm (0.021”)	480–520 µm	Natural	FEP	4,000 psi (276 bar)
F-245	1/16"	610 µm (0.024”)	555–595 µm	Red	FEP	4,000 psi (276 bar)
F-246	1/16"	685 µm (0.027”)	630–670 µm	Yellow	FEP	4,000 psi (276 bar)
F-247	1/16"	840 µm (0.033”)	785–825 µm	Green	FEP	4,000 psi (276 bar)
F-252	1/16"	1.07 mm (0.042”)	1 mm	Purple	FEP	4,000 psi (276 bar)

Part No.	OD	ID	For Capillary Size	Colour	Material	Pressure Rating
F-225	1/16"	125 µm (0.005”)	70–110 µm	Red	PEEK	6,000 psi (414 bar)
F-226	1/16"	180 µm (0.007”)	125–165 µm	Yellow	PEEK	6,000 psi (414 bar)
F-227	1/16"	230 µm (0.009”)	175–215 µm	Yellow	PEEK	6,000 psi (414 bar)
F-228	1/16"	280 µm (0.011”)	225–265 µm	Blue	PEEK	6,000 psi (414 bar)
F-229	1/16"	330 µm (0.013”)	275–315 µm	Natural	PEEK	6,000 psi (414 bar)
F-230	1/16"	405 µm (0.016”)	340–380 µm	Orange	PEEK	6,000 psi (414 bar)
F-231	1/16"	560 µm (0.022”)	505–545 µm	Natural	PEEK	6,000 psi (414 bar)
F-232	1/16"	785 µm (0.031”)	730–770 µm	Natural	PEEK	6,000 psi (414 bar)
F-233	1/16"	865 µm (0.034”)	785–825 µm	Blue	PEEK	6,000 psi (414 bar)
F-234	1/16"	685 µm (0.027”)	630–670 µm	Yellow	PEEK	6,000 psi (414 bar)

Part No.	OD	ID	For Capillary Size	Colour	Material	Pressure Rating
F-374	1/32"	280 µm (0.011”)	225–265 µm	Blue	FEP	1,750 psi (121 bar)
F-375	1/32"	330 µm (0.013”)	275–315 µm	Green	FEP	1,750 psi (121 bar)
F-376	1/32"	395 μm (0.0155”)	340–380 µm	Orange	FEP	1,750 psi (121 bar)

Part No.	OD	ID	For Capillary Size	Colour	Material	Pressure Rating
F-381	1/32"	180 µm (0.007”)	125–165 µm	Yellow	PEEK	5,000 psi (345 bar)
F-382	1/32"	205 µm (0.008”)	150–190 µm	Natural	PEEK	5,000 psi (345 bar)
F-384	1/32"	255 µm (0.010”)	200–240 µm	Blue	PEEK	5,000 psi (345 bar)
F-385	1/32"	380 µm (0.015”)	325–365 µm	Natural	PEEK	5,000 psi (345 bar)
F-386	1/32"	510 µm (0.020”)	455–495 µm	Orange	PEEK	5,000 psi (345 bar)
F-387	1/32"	250 µm (0.011”)	225–265 µm	Red	PEEK	5,000 psi (345 bar)
F-388	1/32"	330 µm (0.013”)	275–315 µm	Black	PEEK	5,000 psi (345 bar)

Deel op

Home Assortiment Laboratorium & HPLC fittingen Micro- en nanofittingen Tubing sleeves en kits

Tubing sleeves en kits

Waarom kiezen voor sleeves?

Uw offertelijst is nog leeg!

Product uit offertelijst?

Momenteel	Gesloten Open
Maandag	08:30 - 17:00
Dinsdag	08:30 - 17:00
Woensdag	08:30 - 17:00
Donderdag	08:30 - 17:00
Vrijdag	08:30 - 17:00
Zaterdag	Gesloten
Zondag	Gesloten