Max-13: galvanic O₂ replacement sensor with NTC temperature compensation
The Max-13 is a galvanic oxygen sensor with built-in NTC temperature compensation for accurate measurement regardless of ambient temperature. Biomedical technicians and buyers looking for a reliable replacement O₂ sensor for ventilators from Philips/Respironics, Covidien, MSA or other brands will find a direct and cost-effective solution in the Max-13.
The Max-13 has a 3,5mm mono-jack connection and is certified to EN ISO 80601-2-55. With an expected life of more than 1.000.000 %O₂ hours and a 14-month warranty, the Max-13 offers a longer life than the Max-11, making it the preferred sensor for equipment where a longer replacement cycle is desired.
What is the Max-13 used for?
The Max-13 replaces the O₂ sensor in ventilators and oxygen analysers for critical care, including ICU ventilators, neonatal ventilation equipment and portable oxygen monitors. The NTC temperature compensation makes the sensor suitable for environments with varying temperatures, such as operating theatres, ICUs and ambulances.
Compatible equipment
The Max-13 replaces the original sensor in equipment from the following manufacturers:
- Philips/Respironics: Criterion Vent, Esprit Vent, Lifecare PLV-102 (37-079 sensor)
- Covidien (Puritan-Bennett): 4-020933-00, 7820 Monitor, 7200 Vent
- MSA: 406931, MiniOX 3000, MiniOX II, MiniOX III
- Dräger: Anestar S
- Datascope: (Anestar S)
- HillRom: 6735142
- Invivo: 9445 Sensor
- Mercury Medical: 10-103-05
- Pacifitech: PT-11A
- Precision Medical: PM5900, 504877
- Teledyne: R17MED (#C-43690)
- Teleflex (Hudson): 5567, V-11
- VTI: 100580
- Viasys: 66030 Sensor, 6400 Vent, 8400 Vent, VIP Vent
Contact Inacom if your device is not in the list above.
Properties
- Galvanic oxygen sensor with NTC temperature compensation
- Connection via 3,5mm mono jack
- Measuring range 0 to 100% O₂
- Output signal 13,0 to 16,5 mV
- Zero offset ≤0,25 mV
- Response time ≤12 seconds
- Linearity ≤3%
- Expected life >1.000.000 %O₂ hours
- Operating temperature 10 to 40°C
- Storage temperature -20 to 50°C
- Humidity 0 to 99% RH, non-condensing
- Ambient pressure 700 to 1.250 mBar
- Compliant with EN ISO 80601-2-55
- 14-month warranty
Technical specifications
| Feature | Value |
|---|
| Measuring range | 0 to 100% O₂ |
| Output signal | 13,0 to 16,5 mV |
| Zero offset | ≤0,25 mV |
| Response time | ≤12 s |
| Linearity | ≤3% |
| Expected life | >1.000.000 %O₂ hours |
| Temperature compensation | NTC |
| Operating temperature | 10 to 40°C |
| Storage temperature | -20 to 50°C |
| Humidity | 0 to 99% RH, non-condensing |
| Ambient pressure | 700 to 1.250 mBar |
| Electrical connection | 3,5mm mono jack |
| Standard | EN ISO 80601-2-55 |
| Warranty | 14 months |
Item number
Max-13: R115P10
