Shell vials: economical, single use
Shell vials are an economical alternative to standard crimp and screw thread vials. They are suitable for single use in autosamplers that do not pressurise the vial. The polyethylene caps have a 0.25 mm star centre that eliminates vacuum build-up in the vial after injection. A special guide in the cap holds and centres limited volume inserts up to 300 µl (cat. no. 150820 and 150821). Supplied in KITPACK®.
| Cat. no. | Volume | Size | Glas |
|---|
| 150301 | 2,0 ml | 12×32 mm | Clear |
| 150306 | 2,0 ml | 12×32 mm | Amber |
| 150302 | 4,0 ml | 15×45 mm | Clear |
| 150307 | 4,0 ml | 15×45 mm | Amber |
Shell vials are also available separately (without caps): 150351/150356 (2.0 ml) and 150352/150357 (4.0 ml). Separate polyethylene caps with insert guide: 150320 (for 12×32 mm) and 150330 (for 15×45 mm).
Sample vials: storage and general analysis
Brown sample vials are made of type I borosilicate glass, which protects against alkali contamination from the glass. They can be cleaned with standard laboratory chemicals and heating techniques without affecting the type I quality. Available from 1.5 to 60 ml, in six thread sizes.
| Cat. no. | Volume | Size | Thread |
|---|
| 150900 | 1,5 ml | 12×32 mm | 8-425 |
| 150901 | 2,0 ml | 12×36 mm | 8-425 |
| 150902 | 4,0 ml | 15×45 mm | 13-425 |
| 150903 | 8,0 ml | 17×61 mm | 15-425 |
| 150904 | 12,0 ml | 19×66 mm | 15-425 |
| 150905 | 16,0 ml | 21×71 mm | 18-400 |
| 150906 | 24,0 ml | 23×86 mm | 20-400 |
| 150907 | 30,0 ml | 27×75 mm | 24-400 |
| 150908 | 40,0 ml | 27×95 mm | 24-400 |
| 150909 | 60,0 ml | 27×140 mm | 24-400 |
Screw caps for sample vials
Black phenolic screw caps available with six liners, each size matching the corresponding thread:
| Liner | Application | Cat. no. series |
|---|
| Solid top (no liner) | Closure without contact | 150910 series |
| SBR (styrene-butadiene rubber) | Routineopslag | 150920 series |
| Butyl/PTFE | Long-term storage | 150930 series |
| Kurk/PTFE | Classic laboratory cap | 150940 series |
| Kurk/aluminium | General use | 150960 series |
| Open top (with hole) + Silicone/PTFE | Syringe access | 152950 series + 152960 series |
Serum bottles: sterilisable, syringe access
Borosilicate glass serum bottles withstand repeated sterilisation and offer direct syringe access through a 20 mm aluminium crimp seal and rubber stopper. The wide neck makes filling and emptying easy. Ideal for reactions, silylation and storage of injectable liquids.
Available in clear and amber glass, 10 to 100 ml:
| Cat. no. clear | Cat. no. amber | Volume | Size |
|---|
| 152000 | 152010 | 10 ml | 25×54 mm |
| 152001 | 152011 | 20 ml | 32×58 mm |
| 152002 | 152012 | 30 ml | 36×63 mm |
| 152003 | 152013 | 50 ml | 43×73 mm |
| 152004 | 152014 | 100 ml | 52×95 mm |
Crimp seals, stoppers and freeze-dry stoppers (20 mm)
| Cat. no. | Type | Description |
|---|
| 151230 | Crimp seal Standard | Remove centre |
| 151231 | Crimp seal Tear-Away | Seal and septum easy to remove |
| 151232 | Crimp seal Open Top | Open centre |
| 151286 | Crimp seal + Butyl/PTFE | Centre hole, mounted septum |
| 151287 | Crimp seal + Silicone/PTFE | Centre hole, mounted septum |
| 151222 | Crimp seal + Rubber-Butyl/PTFE | Centre hole, mounted septum |
| 151290 | Crimp seal + Rubber | Centre hole, mounted septum |
| 151240 | Stopper Butyl | 20 mm |
| 151243 | Stopper Silicone | 20 mm |
| 151248 | Freeze-dry stopper Butyl grey | 20 mm, freeze-drying process |
| 151249 | Freeze-dry stopper Butyl red | 20 mm, freeze-drying process |
Injection vials: pharmaceutical quality
Injection vials are made of type I borosilicate glass (hydrolytic class 1) and protect against alkali contamination from the glass. Use 20 mm aluminium crimp seals. Suitable for pharmaceutical storage, silylation and reactions.
| Cat. no. | Volume | Size |
|---|
| 153200 | 5,0 ml | 20×38 mm |
| 153201 | 10,0 ml | 20×55 mm |
| 153202 | 20,0 ml | 23×75 mm |
| 153203 | 30,0 ml | 30×75 mm |
| 153204 | 50,0 ml | 30×100 mm |
20 mm crimp seals: Standard (151230), Tear-Away (151231) and One-Piece (151232), silver. Coloured versions on request. 20 mm snap-on caps also available.
Low profile vials: greater stability on the lab bench
Low profile vials have a lower profile than standard vials of the same volume, so they stand more stably on the lab bench and are less likely to tip over. Available in 2, 4 and 8 ml.
| Cat. no. | Volume | Size | Thread |
|---|
| 153000 | 2,0 ml | 15×28 mm | 13-425 |
| 153001 | 4,0 ml | 17×38 mm | 15-425 |
| 153002 | 8,0 ml | 19×40 mm | 15-425 |
Screw caps with SBR liner (150921/150922) or Butyl/PTFE liner (150931/150932).
Bio-Grip culture vials: safe handling of infectious material
Bio-Grip culture vials are micro culture vials made of type I borosilicate glass with deep-skirted Bio-Grip screw caps for safe handling of infectious materials. The deep skirt of the cap provides extra grip and reduces the risk of accidental opening. The vials are autoclavable.
| Cat. no. | Volume | Size | Thread |
|---|
| 153100 | 4,0 ml | 15×49 mm | 13-415 |
| 153101 | 8,0 ml | 17×68 mm | 15-415 |
| 153102 | 12,0 ml | 19×70 mm | 15-415 |
Bio-Grip screw caps with SBR liner: 153110 (13-415) and 153111 (15-415). With Butyl/PTFE liner: 153120 (13-415) and 153121 (15-415).
EPA-/VOA-vials: watermonsteranalyse
EPA/VOA vials are specifically for water sample analysis of priority pollutants (EPA methods) and trihalomethanes in drinking water. They are made of borosilicate glass and supplied shrink-wrapped to guarantee cleanliness.
Vial kits (vials + screw caps + septa):
| Cat. no. | Volume | Inhoud kit |
|---|
| 151900 | 40 ml | Vials 151910 + cap 151902 + Silicone/PTFE 3.0 mm (not pre-assembled) |
| 151915 | 40 ml | Vials 151910 + cap 151902 + Silicone/PTFE 1.5 mm (pre-assembled) |
| 151916 | 40 ml | Vials 151910 + cap 151902 + Silicone/PTFE 2.0 mm (pre-assembled) |
| 151917 | 40 ml | Vials 151910 + cap 151902 + Silicone/PTFE 3.0 mm (pre-assembled) |
VOA vials los:
| Cat. no. | Volume | Glas |
|---|
| 151955 | 20 ml | Clear |
| 151956 | 20 ml | Amber |
| 151910 | 40 ml | Clear |
| 151911 | 40 ml | Amber |
| 151912 | 60 ml | Clear |
| 151913 | 60 ml | Amber |
Open top 24-400 screw caps: black (151902) and white (151905). Septa: Butyl/PTFE 1.0 mm (151904), Silicone/PTFE 1.5 mm (151906), 2.0 mm (151907), 3.0 mm (151908).
Bodemtestflesjes: grondmonsteranalyse
Soda glass soil test bottles are supplied shrink-wrapped without cardboard boxes. The wide opening allows efficient filling and emptying of solids, liquids, powders and specimens.
| Cat. no. | Volume | Size | Packaging |
|---|
| 160055 | 150 ml | 57×104 mm | 42 pcs |
GL45 polypropylene screw caps with a 15 mm (160011) or 25 mm (160012) hole. GL45 liners, 2 mm (160017). Caps with pre-assembled liner: 160021 (15 mm hole) and 160022 (25 mm hole).
Vialstation® and Vialtainer®: overview on the lab bench
Vialstation® is a heavy acrylic rack that stands stably on the lab bench. Samples and reagents can be filled and sealed before the vials are placed in the autosampler. Particularly handy for conical and round-bottom vials that cannot stand on their own. With most versions, crimping is possible while the vials are still in the station.
| Cat. no. | Suitable for | Positions |
|---|
| 153500 | Agilent micro/mini vials 151111/112/115/116 | 50 |
| 153502 | Inserts 150610 / 150730 | 50 |
| 153503 | Insert 150613 (50 µl) | 50 |
| 153504 | Unicam/Beckman/SGE vials 152600-152611 | 50 |
| 153506 | Autosampler vials 12×32 mm (151120/151123/150640/155600) | 50 |
| 153507 | Mini vials 151140/141/142 | 50 |
| 153509 | Inserts 150741 / 150820 | 50 |
| 153511 | 4,0 ml vials 150745 | 28 |
All Vialstations: size 190×90 mm. Per piece.
Vialtainer® is a clear polystyrene storage rack for collecting, handling, cataloguing and storing samples. Alphanumeric indexing for quick identification and location of samples. Supplied without vials.
| Cat. no. | Suitable for | Capaciteit | Size |
|---|
| 151340 | Vials 12×32 mm | 77 vials | 200×140×50 mm |
| 151341 | Vials 15×45 mm | 88 vials | 150×90×40 mm |
Index cards: 151350 (for 151340) and 151351 (for 151341), per 10 pieces.
