Stainless steel fittings

Available versions

• Standard construction: Available for the most common port designs, including 10-32, 1/4-28 and M6x1 coned ports.
• Common Valve Fittings: Speciaal ontwikkeld voor de wereldwijd bekende Rheodyne® kleppen.
  • 10-32 ports for 1/16” OD tubing.
  • 5/16-24 ports for 1/8” OD tubing.
• Universal compatibility: We also supply fittings that are fully compatible with hardware from other major manufacturers for connecting 1/16” OD tubing to 10-32 ports.

Installation & safety

To safeguard the integrity of your fluid system and prevent damage to your valuable equipment, we recommend the following guidelines:

• Tightening torque: For an optimal seal without overloading the thread, the recommended tightening torque is 2.25 N·m (20 in-lbs).
• Material compatibility: Never use metal fittings in plastic ports (such as PEEK). The hardness of the steel can permanently deform or damage the softer thread of the port.
• Permanent swaging: Keep in mind that the stainless steel ferrule locks permanently onto the tubing. When switching to a port from another brand, a new tubing section may be needed to avoid dead volumes.